Hello, new member first post, i have a L2350 good running tractor, brought it in for service. Changed the fuel filter, tank has no shut off so i changed it quick and let the fuel fill the filter. I started tractor it ran for a minute and quit, i bled the filter, then bled the pump and then bled the lines at the injectors. Tractor will run for 20-30 seconds and quits, rebled everything and its got air again. Did this 3 times keeps getting air.
I ran i clear bypass line from tank to injection pump, to bypass filter to see if that was the issue, when i did this i notice right before the engine stalls out it dumps air and fuel out of the pump back toward the tank, this kills the engine.
Any ideas what would be cause air and fuel back pressuring from the pump to tank and getting air?
Tractor ran perfect before this, 1322 hours on it.
Thanks for any help.
I ran i clear bypass line from tank to injection pump, to bypass filter to see if that was the issue, when i did this i notice right before the engine stalls out it dumps air and fuel out of the pump back toward the tank, this kills the engine.
Any ideas what would be cause air and fuel back pressuring from the pump to tank and getting air?
Tractor ran perfect before this, 1322 hours on it.
Thanks for any help.
