Im sure i have the tube but have to look about the bushing. No bearing in the cone just the joint that connects the driveshaft to the pinion shaft. If its the pinion shaft thats loose then yes there are bearings that hold it. Just remove those 3 bolts fr the cone and have a look. There shouldn't be any oil in there but most of the time there is from leaky seals on the shaft
You wouldn't know where I might get a 2008 BX25 dash as seen below
You wouldn't know where I could get a 2008 BX25 K2771-99000 dash with Water temp and fuel gauges and RPM LCD display that looks like that below. The gauges are run on small stepper motors and the very tiny gears on the temp gauge gauge is stripped.
Sorry for the delayed response. Your only option really is part K2751-99000 as far as availability. But its $850. That is the newer style with lcd but has the adapter to work with your bx25.
My BX 2200 is the same tractor (without the loader and backhoe). After repairing a broken air cleaner strap several times over the years, a year or two ago came up with this solution which is a winner, for me anyway. KISS solution- cheap imported bungee cord (picture taken about a month or two ago):
thought maybe getting a aluminum or metal thin flat stock and bending it thanks for the insite that it will break so dont buy one
Initially I took the two ends of the broken strap and bent them back into hook shapes.
