Search results

Hi, I have a bx23s and I'm going to be using a 60" UTV snow plow on it and I'm thinking of adding a hydraulic top link as an angle actuator. Has anyone done this? Any advice (including why I shouldn't)? Thanks! Jeff

I was greasing my BX23S backhoe and noticed that one of the o-rings had split and worked its way down the cylinder. I'm assuming that it's important or it wouldn't be there, so my question is whether that is something that I can replace myself or if I need to take it in to a dealer.

I just accidentally added somewhere between 4 and 8 oz of 15W40 instead of hydraulic fluid in my BX23S. Can I live with it or do I need to drain everything and start over from scratch?

Hi, I was greasing my tractor (BX23S) and discovered that once of the zerks is "off-center" and I can't get the grease gun to connect to it. This is the 2nd time that I've greased the tractor and I'm pretty sure that I greased this one last time, but I have a new grease gun now. I have some...

Hi, I recently got a BX23S. I don't have a trailer for it yet, but I'm thinking I'll want a 16ft tandem axle trailer with brakes. If I do that, I'm really flirting with the 3,500-4,500lb towing capacity of the Honda Pilot (especially since there are some long steep hills between here and the...

Hi, I recently got a new (to me) BX23S. Yesterday I found this broken O-Ring in my driveway. Did it come from my tractor? If so, where should I check and what damage might have occurred in the time I was running the tractor after the o-ring broke? Thanks, Jeff