Search results

Greetings, can you buy or has anyone made 6 inch side extension pieces for a kubota snow plow? I have a kubota 60 inch snow plow and I would like to extend it to 72 inches. THANKS

Greetings All, anyone build a land plane for 3PTH, if so could you show plans and measurements with pictures if possible? Thanks later

Greetings, what size thermostat for a B7510

Greetings, my B7510 temperature gauge barely moves of cold, been like that for a number of years. I was telling a friend about it and he said I should get it checked because a diesel needs to run at a certain temperature and cold is not that temperature, Any advice on this situation?

Greetings, have a B7510 HST, the hst pedal sometimes doe not return to neutral and I have to reach down and move it a little in order for it to start, any suggestions to fix it?

Greetings folks, could I get some advice on getting a trailer for a BX23S with loader and backhoe. I know tandem is advisable with electric brakes, what size should I get? Thanks

Greetings, will a B2782 front blower fit a B7510 tractor? The blower is 63 inches wide. It is off a B3030

Greetings Folks, I have a 2008 B7510, bought new in 2008, original battery. Off and on in the last couple of days she won't start when you turn the key, when you turn the key there is a click then the 3 lights on the dash light up, but when you continue turning the key to start there is...

Greetings, can someone help me, how to remove instrument panel from dash on a B7510?

Greetings folks, I have a B7510 with a Curtis cab on it and I want to get behind the instrument panel, can someone tell me how to get it apart?

Greetings fellow Kubotians, Olekid here, I saw a spill guard Wildfire made for his bucket and thought I can make one of those for my 48 inch bucket. Here are some pictures of the start. Used 1 pc flat bar 4" x 48" x 3/16", 2 pcs flat bar 4" x 12" x 3/16" and 1 pc 1" square tubing 48" long, 11...

Greetings fellow Kubotians, Lee here, thinking about turning my back blade into a box blade with just the sides, no teeth, have about 5 inches of loose 1/2 inch gravel on driveway, so it is quite loose. Anyone have any suggestions, like about how far below the sides should the cutting edge be...

Greetings Fellow Kubotians, Olekid here, I have a B7510, thinking of putting a B2763 blade on the frame, will the frame mount for a B2763 snow blade from a B2320 fit my tractor? Thanks Later

Greetings fellow Kubotians, Olekid here, thought I would send a few pictures of a tarp I made for my utility trailer to keep the load from blowing out, cost less than $90 cdn.

Greetings fellow Kubotians, the olekid here, thought I would share a cleaning station I geared up for the ride on mower, First I had a small ramp, I would drive up on it and then lay on the ground and hose out the mower deck. This was hard on the 70 year old body, so, I first had to make a...

Greetings Follow Kubotians, I thought I would share how I process my winter wood (with pictures). In the spring I have 4 cord dropped off at the lake. My wood shed holds 9 cord, I have it divided in half, last winter I burned the pile on the left, so in Sept. I took the wood from the line and...

I will change my question, I have a B7510 with a 3 PTH Kubota snow blower, thinking of getting a Kubota front mount blower, so both blowers are designed to work on my machine ,if you have good dry snow my question is, which one will blow the snow further?

Greetings Folks, I have a B7510 and like most Kubotas the exhaust blows out front onto the bucket and front end of the tractor loading it up with black soot and you are always driving into the fumes. So having gotten tired of cleaning the soot and breathing the fumes I upgraded the exhaust pipe...

Greetings, I did a search for rear wheel weights for a B7510 but nothing came up, but that could be me not doing it right. So, I was wandering if you can get a set of rear wheel weights that bolt onto the rims for my "K". If not does anybody have any suggestions? My tires are loaded and I don't...

Greetings OTT Friends, has anyone fabricated a quick hitch for a BH65 backhoe bucket?