Search results

  1. G

    Koyker KB60 (backhoe attachment) and Kubota B2710

    I just purchased a used backhoe. i want to make sure it will work ok on my tractor 3pt mount without the subframe mount? There are two different ways to attach the backhoe, one is use the top link (regular 3 pt) and the other way is to use drawbar with a kit that came with the backhoe. when I...
  2. G

    B2710 Fuel pump failing?

    I noticed that my tractor will stall sometimes when the fuel level gets close to 3/4 when the engine is running at medium speed. No problem with stalling if engine running at high speed. It appears to get worse sometimes when the tractor is going up or down the slope (not steep).
  3. G

    B2710 Hot Hydraulic Fluid

    I noticed that my tractor hydraulic system is starting to get hot lately. I recently replaced the fluid, filters and cleaned the strainer. I also replaced all rubber suction hoses. I put in a new 0.2 mm shim and 2 washers in the relief valve as when I took the relief valve plug out, the...
  4. G

    B2710 Oil Consumption

    Not long ago I did oil and oil filter change on my tractor (@1,400 hrs), I noticed a very brief burnt oil smell, I looked around for leaks but didn’t find any. I have noticed there will be very brief dark black smoke coming out from the exhaust every time I start it, which I believe is normal...
  5. G

    Unknown brand box blade for B2710

    Hello, I just purchased an old box blade from a guy who doesn’t know much about it because he just bought the property and the previous owner left the box blade. I need your help with identifying the brand of the box blade and to see if it will work on my B2710. The hitch part on it was...
  6. G

    B2710 Hydraulic Relief Valve adjustment

    Hello Kubota folks, I have a few question. I am trying to adjust the psi on my B2710 HST, as the FEL and 3PH felt weak. Before I start with the questions, I want to give a little background. I replaced all rubber hoses, o-rings (that I could locate on the workshop manual), hydraulic fluid...
  7. G

    B2710 hydraulic system not working after changing fluid and filters

    My 2006 B2710 HST with FEl was working fine before I had to do a timely transmission fluid and filter change. Now the power steering, FEL, and 3 pts hitch aren’t working except the drive part. I left the engine running at medium speed for about 20 minutes to see if the hydraulic fluid would...
Top Bottom