Search results

I want to replace the OE seat on my M5660. Tractor Seats dot com salesman says these seats will work. Is anyone using one of these seats on an M5660 or any other tractor model? I think the KM models use the Milsco seat with a KM pedestal. The KM 242 is the KM 236 with armrests. Bill

Where can I get Italian style inner and outer pto tubes? I need series 2 (or B2). I’ve got to lengthen a Binacchi pto shaft. I need 20 inches of each. I can cut to the exact length I need. Bill

Does anyone have any experience with a Peruzzo Turbo400 tractor mounted and driven debris loader? I want to drive down the driveway, suck the leaves out of the ditches and blow the debris further out. https://www.peruzzousa.com/Peruzzo-Turbo-400-p/turbo400.htm Bill

For anyone that has recently acquired a fiberglass canopy from a Kubota dealer, can you determine the actual manufacturer of the canopy? My local dealer can’t show me a picture of what the current canopy looks like.

I have (2) 48” Unverferth rolling basket harrow sections (see picture that I borrowed off of the internet) that we had to remove from the ends of a much wider implement. I’d like to put them on a 3 point hitch tool bar to pull behind my M5660. Has anyone built something like this? Thanks Bill

I bought a pair of Victor 250 series Medalist Made in USA regulators for $45. Both look like they have seen little use. The oxygen regulator is model 250-80-540. The fuel gas regulator is model 250-40-510LP marked “LIQ. PETRO. GAS ONLY”. I intend to use these with a Victor 100C handle and CA1350...

M5660 operation manual page 50 says don’t operate boom and bucket cylinders simultaneously. LA1154 loader operation manual page 9 indicates simultaneous operation is standard procedure. What is the correct procedure?

Who manufactures the canopies that the dealers install on Kubotas?

Anyone have any experience running a Maschio Giraffa M 160SE on an M5660SUHD?

SOLD. 4WD. Hydrostat. This is a workhorse from the newer model range. Very well maintained. Will provide manuals, records, and receipts. Stored inside since I bought it May ‘96. 6 bolt front hubs. Clamp type rear hubs. Mods to hold top link, keep hydrostat pedal in line, and add front...

Is there an official thread that lists abbreviations used on the forum, particularly the abbreviations used for implements and accessories? I figured out “SCwts” is suitcase weights, and “BB” is obviously box blade, but, for example, what are “4wPlow,RR,BP”?

I looked around for a better toolbox for my M5660. Couldn’t find anything that I liked better than the toolboxes on our JDs, so I ordered one and made a bracket for it that bolts to existing holes behind the seat. I can reach in the toolbox from the seat and can see over it to the rear. The tray...

I’ve posted this on AgTalk but I thought I would post here also if it’s ok. If not please delete. Has anyone rebuilt a Ford 5000 oil bath air cleaner or replaced it with a dry element type air cleaner? I have my grandfathers 5000 Ford. The oil bath air filter was in real bad shape. I tried...

Just turned over 10 hours. Drove it on the road to another farm 2.7 miles away. Mowed with a 7 ft rotary cutter. Coming back on the road it made a high pitched sound that sounded like it was coming from the rear end. When I got home I put my hand on the rear axle housing and it was hot enough...

Messick’s doesn’t list an M5660 WSM. Where can I get a real one? Not a copy.

How do you access the screws that hold the “assy meter” aka instrument panel, in place on an M5660? Has to be something in addition to or other than removing the screw shown in the picture. My “meter assembly” is crooked and I would like to make it fit correctly in the dash.

Please bear with me fellows. This kind of stuff gets to me: The manual calls the round amber lights on the top of the fenders the “hazard” lights and indicates that they are turned on using button number 1 in the drawing. On my 5660 the round ambers come on when the key is turned on and button...

Woods mount kit 110348 to install a Woods 1006 on a B7100HSTD missing 2 small plates for $350. Woods hose kit for loader valve 199747 for $250. Can provide individual part numbers and additional details. I DO NOT HAVE THE 1006 LOADER. These are the only parts that I was able to find. Reason for...

Anybody else compared these 2? What are your thoughts? What prices were you quoted for financed O/S tractor, loader, 3rd function?

I’ve been using a 15 gallon 12 volt sprayer on a shop built 3 pt carrier. I want to switch to a small spray rig with a pto pump. What are folks using on a B7100?