Search results

A good video explaining the effects of loader and ballast weights.

Anyone know of a source for wide turf tires and wheels that would fit a LX3310HSDC?

Picked up a pair of 42" pallet forks off Market Place the other day and was going to build a frame for them. While searching for a weld on carriage bar I came across the cheap china offerings. Some were labeled Vevor and all were identical looking. Searching eBay in my usual fashion I set my...

I was spreading some more rye seed with my pull behind spreader yesterday and got the idea to add a way to see the bottom of the hopper. I just drilled a hole in the top and put a add on side mirror in it. I can see all the way down to the spinner from inside the cab with it.

This is my latest hair brained idea. So far it looks like it might work.

I bought this Iron Craft economy grapple a couple of weeks back. I didn't have a current need but I had a pile of small limbs I cut off an azalea bush. I tried to pick the pile up with it and they kept falling out the front. I decided at minimum it needed two more teeth. I made templates of...

I got this installed in my Kubota LX3310 cab tractor and wired up. I cut about 7 inches off the loader handle and welded a couple inches back on from a 1/2-20 bolt. If I were doing it over I would have not rethreaded the handle and just cut the little shaft extension that came in it and welded...

What a joke. The guy that met me in the showroom couldn't answer any questions or provide pricing without leaving me and going in the private office for a 15 minute consultation. He said they usually priced all grapples WITH a third function install so he had to figure out how to sell one...

Getting close to done with my retirement project I started almost 9 years ago. I have a couple more trees to take down. These trees came up wild while I was digging out the stumps from having the land clear cut. By the time I got to the back they were 20-30 feet tall. I had to change gears from...

I have had my little Kubota LX3310 cab tractor a little over a year and put almost 140 hours on it. I bought it mainly as an air conditioned lawn mower and it does a great job at that. Last Fall and recently I removed the mower and delegated some light tractor duties to it. My consensus is it...

Does anyone know if the loader lever knob (grip) on a LX3310 cab model screws off? The online parts site shows it as a separate part from the lever but the illustration doesn't show any threads. It has resisted moderate attempts to remove it.

Nothing fancy. Made a cardboard template to cut out a piece of expanded metal for added grill protection. I found the red edging on Amazon and it blends well with Kubota orange. I left it short enough o be able to open the grill guard back so the hood can still be opened. I am probably going to...

Anybody know the sizes of the two banjo connections for the power beyond tube on a LX3310? I am planning a home brew third function and I need to figure out adaptor sizes for those connections. Push come to shove I will pull the tube and measure but if someone already has the info that would...

Picked this up off FB for $500. I gave the lady an extra $50 for bringing it to my house since she was 2.5 hours away from me. She was passing by my way anyway so it worked for both of us. These are supposedly made by Amish but I can't really find much detail online abut them. I did find one on...

This is something I had on my mind since I got this little LX3310 cab tractor and finally got a round to it. I don't do enough seed or fertilizer spreading to justify buying a 3 point spreader and I already had this pull behind. In the past I connected a long rod to the handle to operate the...

The last couple of times I have mowed when I disengage the PTO and get out the engine shuts off as if the PTO is still engaged. It won't restart until I let it cool and operate the PTO lever on and off then restart. Switch looks like it might be impossible to access with the cab on but I...

Some of you might have read my eBay skid steer plate saga but I will repeat it in this thread. I ordered a 5/16” thick skid steer blank off eBay. It arrived and was way off from specs to fit right. The seller gave me a partial refund to fix it so I was in it for $76.02 plus my time and...

I would like for someone to look at a TSB procedure and tell me what is involved.

Going to mount on the side of the 3pt quick hitch. I drilled and installed nutserts to bolt it on. New chain arrives tomorrow and weld on bucket hooks are ordered.

Anybody know the correct size or part numbers for the o-rings in the LA535 couplers? I have 6 different types of o-ring assortments and they don't match any I have.