Search results

  1. O

    Adding a hydraulic top link

    Seeing the cylinder only moves a few inches and no need to move fast would 1/4"ID hose from the hydraulic control valve be sufficient.
  2. O

    Where is it made

    Looking at the serial number 11 digit is supposed to be factory machine is built. Mine is later G Where is this factory?
  3. O

    Engine oil interval

    It is recommended to change engine oil in the Kubota every 200 hours. I average about 75 hours per year. It would take about 2-3 years to reach that 200 hour mark. Any issues waiting that long? My tractor does very little idle time. Normal use is at 540 pto speed or above.
  4. O

    Baumalight 1P24 stump grinder

    Wondering is anyone has one in use. Your thoughts; good/bad?
  5. O

    Advice on hydraulic quick couplers

    Building a new system from scratch what style do you recommend? With the tractor running and hydraulic system pressurized are you able to hook up implements or do you shut the tractor off and bleed pressure?
  6. O

    Bailey vs Prince hydraulics

    Looking at directional control valves and cylinders I’m wondering if anyone has experience with Bailey Chief line or Prince Wolverine line of products? Good or bad? How about customer service?
  7. O

    Rear remotes

    I looking to add a 3 spool hydraulic valve (tandom center) for rear remotes on my Kubota L3901. The valves I see have a relief valve on them. I am wondering if this is needed as I would add this valve to the power beyond port of the open center system which is regulated pressure. If I understand...
  8. O

    WR Long rear remotes

    I want to add a hydraulic top link. if adding one spool I may add a second or third. I'm looking at WR Long rear remote electronic solenoid kit. Wondering if anyone has installed their kit and can share their experience. Pictures would be helpful. Thank you
  9. O

    Adding rear hydraulics

    I have a L3901 and don't have any implements that require hydraulics at this time but you never know when a new toy becomes irresistible. For a winter project I'm thinking of adding a 2 circuit system with one for use on top link. I'm thinking I would like to build my own vs buying a universal...
  10. O

    Question for someone with a L3901

    My 3 point lift arms don’t seem to go as high as before. Can anyone with a L3901 and R14 tires measure the pin height with arms all the way up? Thank you
  11. O

    Cat 1 to cat 2 lift pin

    Local dealer doesn’t have anything. May have to order online. Know where I can get a set?
  12. O

    Attachment storage

    I'm starting to collect quite a few implements and wondering how you guys are storing them. I don't like the idea of leaving them outside in the elements. I could build a traditional rectangular (pole) shed but I know how that works; the attachment you want is all the way in the back and you...
  13. O

    Land Pride FM25 series flail mower

    Comes in 3 different sizes. 60" 72" and 84" Anyone running one? What are your thoughts? Seems like a well built unit made in USA.
  14. O

    Rhino Ag flail mower

    I see advertised flail mowers made by Rhino Ag (RSM5 RSM6 RSM6H RSM7H) Trying to find some more detailed information on them I do not see them listed on Rhino Ag web site. Wondering if they still make them or did they drop the line?
  15. O

    FEL post hole digger for L3901

    Anyone running a FEL post hole digger on L3901? What do you have and how’s it working.
  16. O

    Offset flail mower for L3901

    How big of an offset flail mower can my L3901 handle before it gets unstable. I’d like to cut the tractor width (5 ft) and as much off the side as possible. I’m hoping 18-24” Power wise I’ll be cutting tall grass with small saplings/brush. I have a brush hog for the bigger stuff.
  17. O

    L3901 3 point lift height

    The 3 point on my tractor doesn't seem to go as high as it used to. It has been well documented by others how a quick attach hitch will hit the rear marker lights. Currently mine won't go that far. Is there some type of limit switch effecting lift height?
  18. O

    Dual acting sickle bar mower vertical trimming

    Looking at some of the dual acting sickle bar mowers. Per the specs they have the ability to work vertically. Wondering if anyone has one that can report how they work. My primary use is to mow road ditches but on occasion would like to trim overhanging small/young branches drooping over the...
  19. O

    L3901 offset mower

    I'm looking to mow road ditches and dykes on our wild rice farm. Maybe some small saplings/brush involved (minimal) Seeing what options are available for a 3 point mounted disc mower, sickle mower or flail mower. Ideally sales in midwest.
  20. O

    2021 L3901 engine oil change

    Excluding the initial 50 hour service the manual for my L3901 says to change engine oil and filter every 400 hours. This is also documented on Kubota service videos. Looking on Kubota web site maintenance schedule is says every 200 hours. This schedule is generic and does not indicate what...
Top Bottom